Product Description

The range of specific putties provides the best foundation for all the NEXA AUTOCOLOR ® paint systems, combining quick and easy application with easy sanding and a pore-free finish.  Modern formulations minimise the risk of adhesion failure; shrinkage or topcoat staining experienced with some other brands.  Select the right product for the type of job to ensure the most efficient application and long-term performance

P551-1085 is a fine, flexible stopper which gives excellent adhesion to both rigid and deformable plastics. It is easy to apply and sand. It is recoatable with Nexa Autocolor primers for plastics.

P551-1052 is a high performance universal stopper, which may be used under any Nexa Autocolor undercoat or Fine Stopper.  It has a smooth creamy application and is formulated to provide excellent adhesion to a wide variety of metal substrates, including  zinc-galvanised.

P551-1058 is an aluminium stopper, which may be used under any Nexa Autocolor undercoat  or Fine Stopper to provide a very durable and tough repair.  It gives heavier flatting dust, which  means a cleaner bodyshop environment.

P551-1059 is a fine stopper, which may be used under any Nexa Autocolor undercoat, to fill
small dents and scratches.  It gives a smooth pore-free surface and may be used on its own or  as a finish to any other stopper.

P551-1070 is an easily flattable lightweight stopper, which may be used under any Nexa Autocolor undercoat or Fine Stopper, and is especially suitable for the filling of large surface
areas. (Note: like most stoppers, this is not suitable over zinc-galvanised surfaces).

P551-1071 is an easily flattable fine stopper, which may be used under any Nexa Autocolor undercoat for the filling of deep layers or shallow surface defects.  It gives a smooth pore-free  surface and may be used on its own or as a finish to any other stopper. 
(Note: like most stoppers, this is not suitable over zinc-galvanised surfaces).

P551-1077 is a high performance universal stopper, which may be used under any Nexa Autocolor undercoat.  It has a smooth easy application, excellent sandability and is
formulated to provide excellent adhesion to a wide variety of metal substrates, including
zinc-galvanised, making it the best all-purpose product available.

P551-1080 is an easily flattable ultra lightweight stopper, which may be used under any
Nexa Autocolor undercoat, and is especially suitable for the filling of large surface  areas.

P551-1089 is a Universal Stopper formulated for adhesion to a range of metal substrates
including zinc-galvanised.  It is easy to apply and sand & can be used under any Nexa Autocolor undercoat.

Product Code: P551-1085

 

Features & Benefits

  • A fine, flexible polyester filler.
  • Offers excellent adhesion to both rigid and
    deformable plastics.
  • Good resistance to light impacts and
    stonechips on lower external bodywork and trim.
  • Extremely flexible

 

 Application Process

 

Shop temperature

5 – 10 ºC

10 – 20 ºC

Over 20 ºC

Hardener  

2 %

2 %

1 %

 

Working time

4 to 9 minutes, depending on stopper type and conditions.

Air-dry at 20°C  15 to 30 Minutes (depending on conditions).

Dry 

P80-P120 and finishing with P150 - P240. 

For additional information, consult technical data sheet F0100V.